OZEN 25 E-Z LOAD Fluid Head

OZEN 25 E-Z LOAD Fluid Head

Key Features

• Convertible 150mm Ball/Flat Base
• 80 lb Payload Capacity
• Camera Build-Lock Safety Pin
• Camera Platform Has 4.72″ of Travel
• 16-Step Counterbalance
• E-Z LOAD Quick Release Plate
• 9-Step + 0 Pan and Tilt Drag
• Independent Pan and Tilt Locks
• Built-In Illuminated Bubble Level
• 2 x Telescoping Pan Handles 

The OZEN Agile 25 E-Z LOAD Fluid Head is a heavy-duty fluid head featuring a wide camera interface for steady support of camera rigs weighing up to 80 lb. The 150mm ball base can be converted to a flat base for lower-profile, slider, or car rig applications. A Build-Lock system provides your gear security and you with peace of mind when assembling your camera and accessories on the head. The camera platform has 4.72″ of travel for balancing the camera forward and back.

This head’s familiar placement of pan, tilt, and counterbalance controls offer comfort and ease while operating, and the 150mm ball base enables fast leveling. This fluid head features nine steps of pan and tilt drag plus a “0” setting for whip pans, 16 steps of counterbalance adjustment, and a built-in illuminated bubble level. Independent pan and tilt locks allow you to lock off one axis and still move the head on the other axis. Replaceable pan handle rosettes on the left and right side of the head enable you to use both included telescoping handles simultaneously.

150mm Leveling Ball/Flat Base

The 150mm leveling ball makes it quick to level the head on your tripod legs or other platforms and keep the center of balance within the 6″ diameter of the base for smoother operation without straining the head. The convertible flat base provides a lower-profile base for a car rig, scaffolding, or other compatible support.

Counterbalance

A 16-step counterbalance enables you to adjust the head for a variety of camera rigs weighing from 8.8 to 80 lb. A counterbalance system neutralizes the weight of the head, so it will hold the desired tilt position.

Pan and Tilt Drag

Nine steps and a zero setting enable you to adjust the head for smooth moves, fast or slow. The dampening settings allow you to adjust your setting from shot to shot, while the stepped settings make your drag selections repeatable.

Build-Lock Safety System

The Build-Lock system allows you to engage a safety pin with the tilt at zero, preventing the tilt axis from moving, while you assemble the camera on the head without having to worry about stressing the pan lock or having the head tilt suddenly under an unbalanced load. Once the camera and accessories are assembled (built) and roughly centered on the head, release the pin and fine-tune the balance on the head.

QR Plate and Balance Adjustment

The E-Z LOAD QR plate supports heavier camera rigs, pops in and out of the camera platform, and does not have any sliding balance adjustment. However, the camera platform that the plate pops into has 4.72″ of back and forth adjustment to aid in balancing your camera on the head. The use of an optional baseplate or VCT system for increased balancing ability is customary with larger cameras.

Dual Pan Handle Rosettes

Removable rosettes on each side of the fluid head allow you to attach the included pan handles for two-handed control. If damaged or stripped, the rosettes can be removed and replaced with new ones.